Check out our timetable Explore

Bend and Fly Single Leg Compression Boot

Bend & Fly Recovery Lounge

Bend and Fly Single Leg Compression Boot

Cordless single-leg air compression

Start low • 15–20 minutes

How to use

  1. Wear clean, loose clothing and sit or recline with your leg fully supported.
  2. Check the fabric, zip and controller. Do not use anything wet, damaged or unusually hot.
  3. Slide one leg into the boot, align your heel and knee, then zip the boot completely.
  4. Attach the charged controller securely and keep its vents clear.
  5. Press Power. Select a programme with M, set 15–20 minutes and start at the lowest pressure.
  6. Remain seated or reclined. Never stand or walk while wearing the boot.

What each button does

PowerStart or stop the controller.
MChange the compression programme.
+ / −Raise or lower pressure.
ClockChange session time.

Finish, clean & reset

  1. Press Power and wait for every chamber to deflate.
  2. Unzip and remove gently. Wipe the interior contact surfaces.
  3. Connect the controller to its labelled charging cable and confirm the charging indicator.
  4. Hang the boot neatly with the zip open.

Power & charging

The controller is rechargeable. Return it to charge after every session.

Never spray liquid into controls, charging ports, motors or electrical openings.

STOP IMMEDIATELY

Stop and release or remove the equipment for pain, numbness, dizziness, nausea, breathing difficulty, unusual swelling, skin-colour change, visual disturbance or excessive pressure or heat.

MEDICAL CLEARANCE

Do not use without appropriate medical clearance if you have a known or suspected blood clot/DVT, serious heart or circulation condition, acute infection, unexplained swelling, recent surgery or fracture, pregnancy, reduced sensation or another relevant medical condition.

Studio support: 0449 934 030  •  Emergency: 000

1/208 Montague Road, West End QLD 4101