Bend & Fly Recovery Lounge
Bend and Fly Dual Leg Compression Boots
Sequential full-leg compression
Mode 1 • Low pressure • 20 minutes
How to use
- Wear clean, loose clothing and sit or recline comfortably.
- Lay both sleeves flat and check the zips, hoses and controller. Remove twists or kinks.
- Insert both legs, align heels and knees and zip each sleeve completely.
- Push the air-hose connector fully into the controller and connect the supplied power adaptor.
- Press On/Off. Choose Mode 1, minimum pressure and 20 minutes.
- Remain seated or reclined. Never stand, walk, fold a sleeve or pull a hose while inflated.
What each button does
On/OffStart or end the session.
PressureChange compression intensity.
ModeChange the inflation sequence.
TimeChange session duration.
Finish, clean & reset
- Press On/Off and allow every chamber to release.
- Switch off at the wall, then disconnect the controller.
- Release the hose using its connector—never pull directly on the tubing.
- Wipe contact surfaces and store sleeves without crushing the hoses.
Power & charging
This is mains powered. Switch it off and return its controller and adaptor neatly; it does not go on charge.
Never spray liquid into controls, charging ports, motors or electrical openings.
STOP IMMEDIATELY
Stop and release or remove the equipment for pain, numbness, dizziness, nausea, breathing difficulty, unusual swelling, skin-colour change, visual disturbance or excessive pressure or heat.
MEDICAL CLEARANCE
Do not use without appropriate medical clearance if you have a known or suspected blood clot/DVT, serious heart or circulation condition, acute infection, unexplained swelling, recent surgery or fracture, pregnancy, reduced sensation or another relevant medical condition.